Home heating comes in a variety of types from the standalone models used for heating small areas to HVAC (Heating, Ventilation and Air Conditioning) systems that heat whole buildings. Unfortunately, the complexity of these devices also grows in size as they do. That is, larger systems such as central heating units have more complex electronics for automated control and convenience. Sadly, these components can break down over time and require the help of an experienced Heating Technician in Waldorf MD.
The type of failure often depends on the method used for heating. For example, an electric furnace might have a damaged heating element or a gas model may develop a fault in the ignition system. Problems that are constant between the two types include blower burnout, failing sensors and thermostat faults. Sensors are used inside the furnace or air exchanger to decide when heat generation should shut off or when the blower needs to cycle. The latter can be very important because the furnace needs to remove any accumulated heat before completely cycling off. This is the reason that many heating system still circulates air even when the thermostat turns it off.
One way to reduce the chance of failure is to have a Heating Technician in Waldorf MD service the unit. Service will also vary by type. Gas based models will need specific attention to detail around vital components like the fuel supply and ignition system. Most electric spark systems are reliable, but there is no indication when they fail. Electric models mostly require cleaning and testing of the sensors and switches. Cleaning is often necessary to remove flammable dust from the heating chamber. The same is true for the furnace side of an HVAC.
One option that is often overlooked is radiant heat. This sort of heating may seem old fashioned, but today’s appliances are actually quite efficient. Radiant heat works by moving a heated liquid, typically water or a water-based solution, through a coil. This coil may be installed under a floor, along a baseboard or as a small unit placed in a wall. In many instances, the coil will have a series of fins to enhance the radiating effect. Please click here to get more info.