Pin It

Heating Repair Tips For Energy Savings

As the cost of energy rises and more people become aware of home heating’s environmental impact, finding ways to save heat and cut costs makes sense. There are numerous options available, which can be customized to fit any budget. Read further to learn how to cut costs and help the environment with home Heating Repair.

Add Insulation

The best way to save heat is to ensure that the home is adequately insulated. Poor attic insulation is the primary cause of heat loss in the home. To prevent the loss of heat, contact a roofer or Heating Repair company to inspect the insulation in the attic and the exterior walls. Windows are another source of heat loss; old windows lose heat faster than energy-efficient new models. Consider changing the windows and resealing the frames for greater efficiency.

Change the Thermostat

The thermostat should be located where there are no substantial temperature variations. If the unit is near the home’s front door, cold air can affect the reading. An HVAC installer from Aatemperatureservices.com can place the thermostat in a central location for greater heat savings. Programmable thermostats can be set to turn the heat down at times when no one is home; for each two degrees it’s lowered, the heating bill can decline by up to four percent.

The thermostat on the water heater should be adjusted as well. Most heaters come set at 140°, but the average household does not need water any hotter than 120°. According to the Department of Energy, every ten degree reduction can save up to five percent in energy expenses.

Some Changes are Free

Some of the simplest changes cost nothing to implement, and they are among the most effective a homeowner can make. Don’t heat an unused room any more than is necessary to prevent pipes from freezing. Energy savings will be significant, and heat distribution will be more even. To save heat in living spaces, switch ceiling fans to turn clockwise. The circulation pattern will be reversed, and cold air will be drawn upward. Set the fan to a low speed to prevent the creation of a draft. You can also follow them on Twitter for more updates.